We will manage your energy projects from start to finish.
Solar power plants
With or without subsidies, we will design and deliver the construction of your tailored industrial power plant solution.
- Average power output of 200-2000 kWp
- TIER 1 quality
- Payback period of 4-12 years
Battery systems
We will enhance the reliability, availability, and efficiency of your energy supply with Tesla and Xelectrix battery storage.
- From 20 kWh to 2400 kWh
- Inrush current limitation
- TIER 1 quality
Service of solar power plants
We provide comprehensive service, standby and monitoring of commercial photovoltaic systems
- 15 years of experience
- Optimizing the operation of PV plants
- Reducing the risk of defects
Sunbeam substructure Nova (in 3 versions)
Sunbeam Nova Universal is a solution for south-facing solar panels. With a 12° tilt and spacing of 1300, 1500, or 17mm (as needed), an optimal system can be created for any project.
Sunbeam Nova Symmetrical for an east-west system with two solar panels at 10° in each position for greater roof utilization (kWp/m²) and maximum yield (kWh/year).
Sunbeam Nova Symmetrical in Portrait version, i.e., vertical orientation.
- Steel with zinc/aluminum/magnesium coating
- Flat roof with a maximum roof slope of 5°
- Roof load approximately 12 to 20 kg/m²
- Standards NEN 7250:2021, NEN 1010, EN 1990, EN 1991-1-3, EN 1991-1-4. Wind tunnel study conducted by Peutz.
Sunbeam substructure Supra
- Steel with zinc/aluminum/magnesium coating
- Tensile load up to 2400 Pa and pressure 5400 Pa on max length 3.3 m²
- Solution for any project
- Roof slope max 5°
- Weight fixation or attachment to the structure
- Standards NEN 7250:2021, NEN 1010, EN 1990, EN 1991-1-3, EN 1991-1-4. Wind tunnel study conducted by Peutz.
Sunbeam substructure Luna
- Installation on sloped roofs including tiled roofs
- Quick installation with the best possible support
- Aluminum material
- Tensile load up to 2400 Pa and 5400 Pa on max length 2.3 m²
- Standards NEN 7250:2021, NEN 1010, EN 1990, EN 1991-1-3, EN 1991-1-4. Wind tunnel study conducted by Peutz.
Aelex substructure
- The structure is designed for mounting PV modules on any facade
Charging station for electric cars
Solution for charging electric cars, which is part of a comprenhesive system of the world’s leading manufacturer SolarEdge
- Power up to 32 A (22 kW)
- Indoor and outdoor installation
- Certificate CE IP54, IK08
Complex project management
As your EPC contractor, we will lead your project from conducting a feasibility study to construction and commissioning. We promise to meet all the deadlines and optimize your costs.
Technical supervision
We will oversee the project and ensure its highest quality that is in line with the requirements of distribution network operators.
Cutting-edge technologies
We will provide you with a maintenance-free solution meeting the TIER 1 quality standards and extended warranty.
We will ensure regulatory compliance
We are well-acquainted with the world of regulations and bureaucratic requirements. Our professionals will make sure that you obtain all the required permits and authorizations.
The IRR of 12 %
Even though energy prices are continually increasing, your can immediately reduce your electricity bill with the payback period of 6 to 12 years. Even without subsidies!
Self-sufficiency
We will guide you to your energy independence and self-sufficiency – you will be able to generate and store your own electricity.
Results
of our work
- power output
- 999 kWp
- payback
- 7 years
- power output
- 999 kWp
- payback
- 6 years
Atlantis is a leader in renewable energy
We are an EPC contractor and a member of the Solar Association with a team of 20 professionals, who all have over 15 years of experience in the energy industry. Keeping the health of our planet in mind, we base our work on precision, quality, and cost-efficiency. We use cutting-edge technologies, high quality materials, and sophisticated procedures.
